Summary of Contents for Living Spaces Sedona 7030-01270 KIT
Page 1
7030-01270 KIT For: 4717 Frame Rails/4400 Bed Ends Sedona Collection: Twin Contempo Bed PARTS LIST BOX 1: 4400 Contempo Twin Ends Part # Picture Description Quantity S0076END Contempo Twin Headboard S0077END Contempo Full Footboard BOX 2: 4717 Contempo Twin Frame Part # Picture Description...
Page 2
Attach two mattress rails(S1001SRL) to headboard assembly(S0076END) and footboard assembly(S0077END) with 8 lag bolts and 8 washers(5040-43181), and tighten. Place slat kit (sold separately) and individual slats(140383/40) in accordance with the diagram on the last page of this instruction sheet. Attach the 5 designated slats to the mattress rail cleats using the #6x1 ¼”...
Page 5
TOOLS REQUIRED: NONE ASSEMBLY INSTRUCTIONS: 1) Push the 4 caster inserts into the pre-drilled holes on the bottom of the bed. Make sure the inserts sit flush with the holes and do not protrude. **Do no attempt to complete step 1 with the caster stems attached to the caster inserts** 4466 5045-65301 2) Once all 4 caster inserts are in place, install the caster wheels by pushing the stems of the caster wheels into the inserts...
Page 6
7030-01195 KIT (Scan code for instructional video) Mateo/Sedona/Summit Collections: Knob and Pull Installation 1. Locate the box containing your knobs and/or pulls in the bottom drawer of your case good. 2. Identify which of the screw sizes is correct for your drawers/doors. The screw should protrude no more than 1/4"...