Living Spaces LS-GAV07 Assembly Instructions

Dresser

DRESSER

Important: Be sure to check all packing material carefully for small parts which may come loose inside carton

during shipment. Separate, identify and count all parts and metal hardware.

Compare with parts list and hardware illustrations to be sure all parts are present. If any part(s) are missing or

damage, contact your dealers customer services deparment. For efficient and fast service, please indicate

the model number and the parst needed.

ATTENTION: Some lettered parts listed on the instruction sheets may not be in the parts bag, they

may already be assembled.

TOOLS REQUIRED

(Not included)

Phillips Screwdriver

Anti-Tip

Part No. HB-488 (1 pc.)

See page 2

ASSEMBLY INSTRUCTIONS

Pull drawer

Part No. HBJ-2970DN

(7 Pcs) INSTALLED

MODEL No. LS-GAV07

Bolt 8/32 x 7/8

Part No.HCPP-078A

(14 Pcs) INSTALLED

PAGE 1 OF 2

Table of Contents

Do you have a question about the LS-GAV07 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS DRESSER MODEL No. LS-GAV07 Important: Be sure to check all packing material carefully for small parts which may come loose inside carton during shipment. Separate, identify and count all parts and metal hardware. Compare with parts list and hardware illustrations to be sure all parts are present. If any part(s) are missing or damage, contact your dealers customer services deparment.
Page 2 WARNING INSTALL FURNITURE TIPPING RESTRAINT KIT Warning Advertencia Avertissement ANTI-TIP Installation instructions: This tip restraint must be attached to wall stub using 2” screw enclosed 1.Attach a bracket securely to the back top rail of the furniture using the 5/8” screw provided through the smaller hole. 2.