Page 3
TECHNICAL DATA MACHINE Fertilizer spreader XA150 XL250 SERIES and MODELS XL300 XA250 XL400 XA300 XL500 XA400 XA500 POWERED BY Tractor PTO Shaft MANUAL IDENTIFICATION VERSION UPDATE 17-11-2020 This part of the user's guide has to be filled in on delivery; it is advisable to mention the above indicated identification data whenever you contact your dealer XA•XL Fertilizer spreader...
1 FOREWORD This guide is integral part of the machine and contains all necessary information for use and maintenance. Before using or servicing the machine, operators and technical staff are required to read this guide carefully. This guide, or a copy of it, must be kept in a convenient place for reference. It is advisable to contact the manufacturer for any further information.
4 IDENTIFICATION PLATE (Optional) The machine identification plate (where fitted) containing all relevant identity information is located on the guard. (Fig.1) Fig. 1 Fig. 2 5 WARNING SIGNS The warning sings are affixed to the hopper, the frame and the guard as shown in the picture below.
6 MACHINE DESCRIPTION This centrifugal spreader is suitable for spreading granular, dry or humid fertilizers and is designed to be hitched to tractors or self-propelled machines. The fertilizer is spread by means of a rotating disc equipped with 4 blades. The machine consists of : 1 - spreading disc with blades 2 - frame and protections...
Never carry out any maintenance work with the spreader in operation or while the tractor is running. Never carry out any maintenance work with the spreader connected to the 3-point- hitch of the tractor: the spreader may suddenly fall down. Before connecting the P.T.O.
9 LOADING Before loading the hopper, make sure the tractor is off and the P.T.O. shaft disconnected. We recommend that the whole loading operation is carried out by the same operator. Lay down the spreader on the ground and then load the hopper.
13 ASSEMBLY Operators are required to be extremely careful during assembly. The assembly must be carried out following the instructions of the user's guide. The accident prevention standards must be observed: always use suitable tools. 1- Fix the gear-box (1) to the frame (T).
14 HITCHING Before hitching the spreader to the tractor, turn the motor off, disengage the P.T.O. and put the handbrake on. Insert the lower bars of the tractor-lifter into the inside or outside lower coupling pins of the spreader, according to the pinhole diameter, and secure with split pins.
15 ACCESSORIES The fertilizer-spreader can be equipped with the following accessories: - Articulated agitator kit for powder fertilizers (Fig.12) - Mechanic remote control (Fig.13) - Deflector for salt/sand (Fig.14) - Single fertilizer conveyor (Fig.15) - Dual fertilizer conveyor (Fig.16) ARTICULATED AGITATOR KIT FOR POWDER FERTILIZERS This accessory together with the agitator permits the spreading of powder or damp fertilizers;...
Page 13
SINGLE FERTILIZER CONVEYOR It consists of 2 steel hulls that cover the spreading disc and allows a precise and localized distribution. Fig.15 DUAL FERTILIZER CONVEYOR It allows to throw the fertilizer on the right and on the left side of the machine. Fig.16 XA•XL Fertilizer spreader...
16 MAINTENANCE Before any maintenance operation or replacing of spare parts, make sure the spreader is detached from the tractor or at least laid on the ground. Always switch the tractor motor off, remove the ignition key and make sure the spreader is securely fixed.
Respect the natural environment. Throw the carton boxes in the proper containers 19 TECHNICAL FEATURES • MEASURES MODEL HEIGHT WIDTH LENGTH CAPACITY WEIGHT MAX LOAD XA 150 89 cm 90 cm 108 cm 150 l 45 kg 550 kg XA 250 97 cm 100 cm...
Page 16
SPREADING TABLE kg/ha of fertilizer to be spread at the speed Spreading indicated in column km/h Fertilizer type km/h width (m) OPENING 225 375 691 1139 1455 1795 2175 2628 2890 3250 3560 4005 Coarse grained 106 156 277 465 580 720 887 1050 1155 1305 1450 1628 fertilizers 145 230 292 360 441 530 586 675 742 835 156 197 245 292 363 385 450 485 552...
Page 17
SEEDS SPREADING TABLE Forward speed in km/h Spreading SEED FEED width (m) WHEAT 1025 BARLEY RYE GRASS RAPE SEED RED CLOVER In order to make the reference to the spreading table as clear as possible, we have listed only a few SEEDS that differ in composition, quality, shape and specific weight.
Page 18
ATTENTION ! THE USE OF ORIGINAL PARTS TO ENSURE THE CORRECT FUNCTIONING OF THE MACHINE. ATTENZIONE ! PER UN CORRETTO FUNZIONAMENTO DELLE NOSTRE MACCHINE USARE ESCLUSIVAMENTE RICAMBI ORIGINALI...
Page 26
ATTENTION ! THE USE OF ORIGINAL PARTS TO ENSURE THE CORRECT FUNCTIONING OF THE MACHINE. ATTENZIONE ! PER UN CORRETTO FUNZIONAMENTO DELLE NOSTRE MACCHINE USARE ESCLUSIVAMENTE RICAMBI ORIGINALI XA-XL Fertilizer spreader Spare parts...
Page 27
ARTICULATED AGITATOR AGITATORE ARTICOLATO XA 150 XA 250 XA 300 XA 400 XA 500 XL 250 XL 300 XL 400 XL 500 SERIES XA-XL Fertilizer spreader Spare parts...
Page 29
DEFLECTOR FOR SALT/SAND DEFLETTORE SPARGI SALE/SABBIA XA 150 XA 250 XA 300 XA 400 XA 500 XL 250 XL 300 XL 400 XL 500 SERIES XA-XL Fertilizer spreader Spare parts...
Page 30
REF. CODE Q.TY DESCRIPTION DESCRIZIONE PAR3001 DEFLECTOR SUPPORT SOSTEGNO CONO PAR3002 ADJUSTING TUBE TUBO DI REGOLAZIONE 659208ZN GALVANIZED PLAIN WASHER M8 RONDELLA PIANA ZN M8 DIN 125/A PAR3004 SUPPORT BRACKET RH DEFLETTORE CARTER DX PAR3005 SUPPORT BRACKET LH DEFLETTORE CARTER SX 558808ZN GALVANIZED HEXAGON MEDIUM NUT M8 DADO ESAGONALE MEDIO PG ZN M8...
Page 31
FERTILIZER CONVEYOR CONVOGLIATORE XA 150 XA 250 XA 300 XA 400 XA 500 XL 250 XL 300 XL 400 XL 500 SERIES XA-XL Fertilizer spreader Spare parts...
Page 32
REF. CODE Q.TY DESCRIPTION DESCRIZIONE CON100E LEFT BANDING CONVOGLIATORE SX CON100F RIGHT BANDING CONVOGLIATORE DX CON1045 BANDING BACK FONDO CONVOGLIATORE CON1046 LEFT BANDING BACK FONDO CONVOGLIATORE SX CON1044 SUPPORT SOSTEGNO CHIOCCIOLA 80100250 COTTER PIN A R D.2 L.50 SPINA A R D.2 L.50 57400615 GALVANIZED ROUND SCREW M6X16 VITE TE F/ROND.
Page 33
DUAL FERTILIZER CONVEYOR CONVOGLIATORE DOPPIO XA 150 XA 250 XA 300 XA 400 XA 500 XL 250 XL 300 XL 400 XL 500 XA-XL Fertilizer spreader Spare parts...
Page 34
REF. CODE Q.TY DESCRIPTION DESCRIZIONE CON100H RIGHT DOUBLE BANDING KIT CONVOGLIATORE DOPPIO DX CON100G LEFT DOUBLE BANDING KIT CONVOGLIATORE DOPPIO SX CON1046 LEFT BANDING BACK FONDO CONVOGLIATORE SX CON1031 TWO-SIDE SPREADING ADJUSTER REGOLATORE DOPPIO SPAGLIO CON1044 SUPPORT SOSTEGNO CHIOCCIOLA 80100250 COTTER PIN A R D.2 L.50 SPINA A R D.2 L.50 57400615...
Page 35
MECHANIC REMOTE CONTROL COMANDO MECCANICO ADISTANZA XA 150 XA 250 XA 300 XA 400 XA 500 XL 250 XL 300 XL 400 XL 500 SERIES XA-XL Fertilizer spreader Spare parts...
Page 37
STAINLESS STEEL SPREADING DISC DISCO SPARGITORE IN INOX XA 150 XA 250 XA 300 XA 400 XA 500 XL 250 XL 300 XL 400 XL 500 SERIES XA-XL Fertilizer spreader Spare parts...
Page 39
ASSEMBLY GUIDE Assembly Sequence 1. Install the gearbox to the frame. 2. Install the spinner on the gearbox upright spindle . 3. Install the cross- member on the back of the frame . 4. Attach the hopper gates with the tabs facing in opposite directions.
Page 40
ASSEMBLY GUIDE Direction shutter set to disperse material to the right hand side Direction shutter set to disperse material to both sides Direction shutter set to disperse material to the left hand side XA-XL Fertilizer spreader Spare parts...
Need help?
Do you have a question about the XA 150 and is the answer not in the manual?
Questions and answers