Items Supplied; How To Use; Operation; Blade Insert - Silvercrest 93441 Operating Instructions Manual

__RP93441_B6.book Seite 5 Montag, 12. August 2013 3:26 15
WARNING! Risk of material
damage
• The maximum filling level for solid food
is 350|ml.
• The maximum filling volume for liquids
(e.g. cream) is 200|ml.
• The device is designed for a maximum
operating time of 1 minute without inter-
ruption. After this, the device must re-
main switched off until it has cooled
down to room temperature.
• In order to avoid damage to the device,
interrupt the mixing process immediately
if the blade insert / cream attachment
does not rotate or only rotates slowly.
Pull out the mains plug and check
whether there is something in the vessel
blocking movement or whether the food
is too tough. Also check whether the de-
vice is assembled correctly.
• Do not operate the device when it is emp-
ty, as this causes the motor to overheat
and may result in it being damaged.
• Only use the original accessories.
• Do not use any astringent or abrasive
cleaning agents.
• The device is fitted with a non-slip plas-
tic base. Because furniture can be coat-
ed with a wide variety of varnishes and
plastics and treated with various care
products, the possibility cannot be ex-
cluded that some of these substances
have ingredients that may attack and
soften the plastic base. If necessary,
place a non-slip mat under the device.

4. Items supplied

1 Motor block 3
1 Working cover 4
1 Vessel 7
1 Vessel cover 9
1 Blade insert 6 and 1 cream attachment 5
(assembled)
1 Set of operating instructions

5. How to use

• Remove all packing material.
• Check to ensure that all parts are pre-
sent and undamaged.
• Clean the device prior to its first
use! (See "Cleaning" on page 8.)

6. Operation

DANGER! Risk of electric shock!
Only insert the mains plug 2 into a
wall socket when the multi chopper is
fully assembled and filled.
DANGER! Risk of injury from
cutting!
• The blade insert is sharp. Handle it with
care.
• The device must never be operated with-
out the vessel.
• The blade insert continues to rotate after
the device is switched off. Wait for it to
stop moving before you remove the
working cover.
WARNING! In order to avoid damage to
the device, interrupt the mixing process im-
mediately if the blade insert 6 / cream at-
tachment 5 does not rotate or only rotates
slowly. If this happens, pull out the mains
plug 2 and check whether there is some-
thing in the vessel 7 blocking movement or
whether the food is too tough. Also check
whether the device is assembled correctly.

6.1 Blade insert

Application area
The blade insert 6 is suitable for chopping sol-
id foods, e.g. onions, carrots, cheese, nuts.
Preparing food
• Use ...
... no more than the maximum
filling level of 350|ml of solid
food, or
... a maximum of 200 ml of liquid.
5
GB