Troubleshooting Guide - Sony XR-1940 Operating Instructions Manual

Troubleshooting guide

The following check help you remedy most problems that you may encounter with your unit.
Before going through the checklist below, check the connection and operating procedures.
General
Problem
No sound
Tape playback
Problem
Playback sound is distorted.
Radio reception
EN Problem
Preset tuning is not possible.
Automatic tuning is not possible.
The "STEREO" indication
flashes.
12
Actual total number:
Cause/Solution
• Adjust the volume with (+).
• Set the fader control to the center position on the 2-speaker
system.
Cause/Solution
Contamination of the tape head. n Clean the head.
Cause/Solution
• Memorize the correct frequency.
• The broadcast is too weak.
The broadcast is too weak. n Use the manual tuning.
• Tune in the frequency correctry.
• The broadcast signal is too weak. n Press (LOUD/SENS) to set
the monaural mode.
Sony XR-1940 (E,S,C) 3-856-691-42 (1)