Honda CLARITY PLUG-IN HYBRID 2019 Owner's Manual page 92

uuIndicatorsu
Indicator Name
READY Indicator
Malfunction
Indicator Lamp
12-Volt Battery
Charging System
Indicator
90
On/Blinking
Comes on when the vehicle is
●
ready to drive.
Comes on when you set the power
●
mode to ON, and goes off either
when the power system is on or
after several seconds if the vehicle
did not start. If "readiness codes"
have not been set, it blinks five
times before it goes off.
Comes on if there is a problem
●
with the emissions control system.
Blinks when a misfire in the
●
engine's cylinders is detected.
Comes on when you set the power
●
mode to ON, and goes off when
the power system is on.
Comes on when the 12-volt
●
battery is not charging.
Explanation
May go off if the POWER SYSTEM or
●
transmission system indicator comes on.
2 Turning on the Power P. 378
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 573
Comes on while driving - Have your
●
vehicle checked by an authorized Honda
Clarity Plug-In Hybrid dealer.
Blinks while driving - Stop in a safe
●
place where there are no flammable
objects. Stop the power system for 10
minutes or more, and wait for the engine
to cool down. Then, take the vehicle to an
authorized Honda Clarity Plug-In Hybrid
dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 549
Comes on while driving - Turn off the
●
climate control system and rear defogger
in order to reduce electricity
consumption.
2 If the 12-Volt Battery Charging
System Indicator Comes On P. 548
Message