Honda CLARITY PLUG-IN HYBRID 2019 Owner's Manual page 390

uuWhen DrivinguShifting
■
If you want to keep the transmission in
With the power system on:
1. Depress the brake pedal.
2. Make sure the READY indicator is on.
3. Press ( N . Within six seconds press and hold
u This puts the vehicle in car wash mode which must be used when your vehicle
is pulled through a conveyor type automatic car wash where you or an
attendant do not remain in the vehicle.
If you want to cancel car wash mode, select a position other than
If you want to reduce energy consumption in car wash mode:
Press the POWER button during car wash mode.
u Make sure the READY indicator is off.
u The gear position remains in
minutes, then, it automatically changes to
OFF.
Manually changing to
and the power mode changes to OFF. You must always shift to
mode is no longer needed.
388
N position [car wash mode]
(
N for two seconds. (
N with the power mode in ACCESSORY for 15
(
P and the power mode changes to
(
P cancels ACCESSORY mode. The
(
1If you want to keep the transmission in
mode]
To keep the vehicle in
follow this procedure:
While the power system is on, select
within five seconds, press the POWER button.
Note that the transmission may not stay in
position while any of the following indicators is on:
•
•
•
N .
(
P indicator comes on
(
( P when car wash
N (
position, you can also
( N
POWER SYSTEM indicator
Transmission system indicator
12-volt battery charging system indicator
position [car wash
, and then
N (
( N