Honda CLARITY PLUG-IN HYBRID 2019 Owner's Manual page 114

uuIndicatorsuDriver Information Interface Warning and Information Messages
Message
●
●
●
●
●
●
●
112
Condition
Appears when the parking button is pressed while
the vehicle is moving.
Appears if you change the gear position to
the vehicle is moving forward, or to
vehicle is reversing.
Appears if there is a problem with the electric system.
Appears when you set the power mode to OFF while
driving.
Appears when the vehicle is stopped with the driver's
seat belt unfastened and there is a chance that the
vehicle may roll unintentionally.
Appears for a few seconds if you have not pressed
the N button long enough to initiate Neutral-Hold
(
mode.
Appears when you press and hold
more than 2 seconds.
Make sure that the vehicle comes to a stop before
●
operating the select button.
( R while
D while the
(
Immediately stop in a safe place and set the parking
●
brake.
Resume driving if the message disappears.
●
If there is a problem with the transmission system, the
●
transmission system indicator comes on.
2 Transmission System Indicator P. 92
Press the
●
when idling, parking, or exiting the vehicle.
2 Shift Operation P. 386
2 If you want to keep the transmission in
position [car wash mode] P. 388
N button for ( Disappears when you set the gear position to other than
●
N .
(
2 If you want to keep the transmission in
position [car wash mode] P. 388
Explanation
P button before releasing the brake pedal
(
( N
( N