Honda CLARITY PLUG-IN HYBRID 2019 Owner's Manual page 461

■
How to Charge (Level 1)
Charge Lid
Release
Button
Charging Cable Bag
1. Put the transmission into ( P and set the
power mode to OFF.
2. Press and hold the lid open button on the
remote transmitter, or press and hold the
charge lid release button on the dashboard.
u The lid opens.
u The illumination lamp inside the charge
lid comes on for a few minutes.
3. Open the trunk, and remove the bag.
4. Open the bag, and take the charging cable
out.
u Do not tie or coil the cable when in use.
uuCharginguCharge the High Voltage battery using a Level 1 or 2 charger
1Charging
Charging the High Voltage battery under
the following conditions is a potential
source of electric shock and fire, which can
result in serious injury or death:
• Charging the battery during an electric
storm.
• Using the charging cable near water or
handling with wet hands.
• Using a charger, whose case is broken or
cracked or whose cable is frayed or
damaged.
Never charge the vehicle in any of the
above situations.
Using a charger that is damaged or
modified can cause electrical shock and
fire, which can result in serious injury or
death.
Never disassemble or modify the charger. If
the charger becomes damaged, stop using
it and consult an authorized Honda Clarity
Plug-In Hybrid dealer.
Continued
WARNING
3
WARNING
3
459