Message
Appears when you set the power mode to ON
●
without fastening the driver's seat belt.
Appears if the gear position has been automatically
●
changed to
vehicle out of
seatbelt fastened.
Appears when you try to change the gear position
●
without depressing the brake pedal while the
transmission is in
Appears when you try to change the gear position
●
without releasing your foot off the accelerator pedal
while the transmission is in
Appears when the transmission system temperature
●
is too high.
Appears when you depress the accelerator pedal
●
while the transmission is in
uuIndicatorsuDriver Information Interface Warning and Information Messages
Condition
P and the driver attempts to take the
(
(
P but does not have his or her
P or
N .
(
(
P or
N .
(
(
N .
(
Explanation
Fasten the seat belt properly before you start to drive.
●
2 Shift Operation P. 386
Depress the brake pedal, then select a shift button.
●
Release your foot off the accelerator pedal, then select
●
a shift button.
Park in a safe place, and allow the system to cool down
●
sufficiently.
Release the accelerator pedal.
●
Depress the brake pedal, then select a shift button to
●
start driving.
Continued
111