Bush VM19HDLED Instruction Manual page 37

Standard features
Simple everyday use
CI (Common Interface) C
A Allows the Common Access Module to be
in inserted and access the content that has been
encrypted.
Common Access Module
To insert the Common Access Module
1. Before you insert the Common Access Module,
ensure that the TV is switched off and the viewing card
is inserted in accordance with the Service Provider's
instructions.
2. Insert the Common Access Module into the slot. Flip
the Common Access Module to another side and try
again if you feel resistance.
3. Switch the TV on.
To remove the Common Access Module
1. Before you remove the Common Access Module,
ensure that the TV is switched off.
2. Pull the Common Access Module from the slot.
3. Switch the TV on.
Signal Information (DTV mode)
1. Press the MENU button to display the main menu.
Press the  buttons to select Channel in the main
menu, then press the OK button.
2. Press the  buttons to select Signal Information
and then press the OK button to view the Signal
Information.
or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 604 0105.
3. Press the EXIT button to exit the menu.
Network management
1. Press the MENU button to display the main menu.
Press the buttons to select Network in the main
menu, then press the OK button, it will highlight the first
option.
2. Press the  buttons to change the following
settings.
Ethernet
Press the or OK button to select DHCP On or Off.
Network Test
Press the or OK button to start the test.
Network Information
Press the or OK button to see network information.
3. Press the EXIT button to exit the menu.
Time management
1. Press the MENU button to display the main menu.
Press the buttons to select Time in the main menu,
then press the OK button, it will highlight the first option.
2. Press the  buttons to change the following
settings.
Standard features
37