Table of Contents
Advertisement
3-4. Installation of the eye guard
(1) Mount the eye guard (No.1) with screw (No.2) to sewing machine head.
<2>
3-5. Installation of the rubber cushion
(1) Screw the adjust foot
the adjust foot and floor which included in accessory box. For the other three rubber cushions, the
procedure is same.
(2) Screw the adjust foot
each four caster
(No.3)
check if there is no inclination about the machine table.
<2>
<1>
<1>
in the direction of "a" arrow and locate the rubber cushion
(No.2)
in the direction of "b" arrow and adjust the adjust foot height so that the
(No.2)
is to be raised from the floor by several millimeters. After adjustment please
a
b
<1>: Eye guard unit
<2>: Screw
<1>: Rubber cushion
<2>: Adjust foot
<3>: Caster
<3>
- 5 -
between
(No.1)
Advertisement
Table of Contents
