Table of Contents
Advertisement
(2) Press the
icon from the [PF position adjustment] screen.
(3) Replace the presser foot with standard one.
(4) Press the
set the gap between bottom of presser foot and top of needle plate to be 0 to 0.1 mm. The screen
indicates ZNPP default value (Upper) and current value (Lower).
NOTE The ZNPP value can be set every 0.1 mm.
15.0
15.0
15.0
icon and down the presser foot to the top of the needle plate. In this time,
30.0
28.0
- 34 -
Advertisement
Table of Contents
