Scanning radio stations
■
Scanning the preset radio stations
Press and hold
STEP
1
Preset stations will be played for 5 seconds each.
When the desired station is reached, press
STEP
2
■
Scanning all the radio stations within range
Press
STEP
1
All the stations with reception will be played for 5 seconds each.
When the desired station is reached, press
STEP
2
■
When the 12-volt battery is disconnected
Preset stations are erased.
■
Reception sensitivity
●
Maintaining perfect radio reception at all times is difficult due to the con-
tinually changing position of the antenna when driving, differences in sig-
nal strength and surrounding objects, such as trains, transmitters, etc.
●
When
ble.
●
The radio antenna is mounted on the rear roof. The antenna can be
removed from the base by turning it.
NOTICE
■
To prevent damage, remove the antenna in the following cases.
●
The antenna will touch the ceiling of a garage.
●
A car cover will be put on the roof.
until you hear a beep.
.
is used, automatic station selection may not be possi-
3-2. Using the audio system
again.
again.
3
255