How To Use - Xiaomi MI E12 User Manual

How to Use

Start Vacuuming & Mopping
1. Press and hold the release bu on to remove the 2-in-1 dust compartment
with water tank. Open the plug, fill the tank with clean water, and then
refasten the plug. Install the 2-in-1 dust compartment with water tank onto
the robot vacuum until it firmly clicks into place.
CAUTIONS:
Please remove the 2-in-1 dust compartment with water tank before adding water. Do not
add liquids such as hot water, detergent, or disinfectant to prevent damaging the robot
vacuum.
Due to production testing, the 2-in-1 dust compartment with water tank may have water
stains, which is normal.
2. Before using the vacuuming & mopping function, dampen the mop pad and
wring it out and then install it onto the mop pad holder.
Install the mop pad holder to the 2-in-1 dust compartment with water tank,
as illustrated.
Open the plug and
add water.
Release Bu on
3. Install the 2-in-1 dust compartment with water tank into the robot vacuum.
Press the bu on to start vacuuming and mopping.
CAUTION: Remove the 2-in-1 dust compartment with water tank and pour out the le over
water in a timely manner a er a mopping task has been completed. Then clean and dry the
mop pad to prevent odor and mildew.
If only vacuuming function is needed, please remove the
mop pad holder.
09
Pull the holder out as
illustrated