LG CordZero A9 K Owner's Manual page 32

32 MAINTENANCE
CAUTION
• Always separate the nozzle from the product
body or remove the battery before cleaning. If
the nozzle starts to operate during cleaning, it
could cause an injury.
• Keep fingers away from pinch points when
assembling the nozzle on the appliance or the
rotating brush on the nozzle.
• Do not use the rotating brush as a wet mop. It
may cause product damage.
Cleaning the Slim Hard Floor Nozzle
1
Press the nozzle release button
the nozzle from the extension pipe or product
body.
2
Turn the nozzle upside down and remove the
rotating brush while holding down the PUSH
button on the nozzle.
3
Attach the crevice tool to the product body
and use the vacuum to remove foreign
objects and dust from the brush and the
bottom of the nozzle.
4
Use a damp towel or cloth to remove any
remaining foreign objects and dust from the
brush and the bottom of the nozzle.
• Remove foreign objects from the rollers of
the nozzle using tweezers.
to remove
a
5
Cleaning the Universal Nozzle
Clean the brush and roller heads before each use.
• If the brush contains foreign objects, the brush
may not spin or a noise may occur during
operation.
1
2
3
• Do not rinse or submerge the rotating
brush or nozzle in water.
• Wrap the handle of the cleaning brush with
a wet towel or cloth and use it to clean the
rotating brush and nozzle.
Slide the brush back into the nozzle until it
clicks into place.
Press the nozzle release button
the nozzle from the extension pipe or product
body.
Turn the nozzle upside down and rotate the
cover lock slot counterclockwise.
b
Pull the brush cover forward and pull the
brush out.
to remove
a