CAMDEN CM-SRFM2 Kit Installation Instructions

CM-SRFM2 Kit
Wireless 2 Channel Receiver with two transmitters
Installation INSTRUCTIONS
THIS PACKAGE INCLUDES:
(1) CM-SRX2 Receiver
(1) User Manual
(2) Transmitters CV-WTX2

1. DESCRIPTION

The CM-SRFM2 is a wireless transmitter kit that includes two,
2 button transmitters and one 2 channel receiver. This kit will
control up to two doors from one device. Ideal for front desk/
reception applications or hard-to-wire locations. Designed
to work with magnetic locks, electric strikes, keypads, gate
operators and door operators. Kits include channel receiver
and transmitter.
• Receiver can be mounted inside or outside. IP65 rated
• Rolling code encryption
• Field configurable latching/bi-stable mode keeps doors
unlocked until button is pressed again
• Receiver can be controlled by up to 30 transmitters
• Receiver relay mode is either momentary or bi-stable
for 2nd relay.

2. SPECIFICATIONS

Input Power
Standby Current
Operating Current
Working Humidity
Working Temperature
Lock Relay
Memory
Encryption
Number of Relays
Frequency
IP Rating
Receiver Dimensions
Transmitter Battery
Transmitter Dimensions
(2) Wall Plugs (used for mounting)
(2) Self Tapping Screws (used for
mounting)
12V or 24V AC/DC
18mA (Input VDC12V)
80mA (Input VDC12V)
3-1/4" (82mm)
0-95%
-20°C to 85°C (-4°F to 185°F)
1A @ 30VDC
30 codes
High security rolling code. 19 tril-
lion combinations
2 relays; 1 relay momentary, 2
7-3/8" ST
(187mm)
momentary or latching/bi-stable
868.35 MHz
65 with grommet
7-3/8" W x 3-1/4" H x 1-5/8" D
(187mm x 82mm x 42mm)
CR2032 3 volt
FCC ID: U5Z-CONNECT4CC
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
2" W x 3/16" H x 1" D
interference hat may cause undesired operation.
(55mm x 30mm x 10mm)
Front View
(1) Grommet

3. DIMENSIONS

7-3/8"
(187mm)
1-5/8"
(42mm)
5/8"
(15mm)
ND
5"
(127mm)
Side View
3-1/4" (82mm)
5"
(127mm)
FCC ID: U5Z-CONNECT4CC
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference hat may cause undesired operation.
Front View
1/8" (4mm)
Mounting Hole
( 2 Places )
1/16"
(2mm)
Back View
1-5/8"
(42mm)
5/8"
(15mm)
1/1
(2m
Side View
3-7/8"
(97mm)
1-5/8" (41mm)
Page 1 of 3