Advertisement
CM-SRX2
Wireless 2 Channel Receiver
INSTALLATION INSTRUCTIONS
THIS PACKAGE INCLUDES:
(1) CM-SRX2 Receiver
(1) User Manual
(2) Wall Plugs (used for mounting)
1. DESCRIPTION
The CM-SRX2 is a standalone receiver that allows access
control up to two doors from one device. Ideal for front desk/
reception applications or hard-to-wire locations. Designed
to work with magnetic locks, electric strikes, keypads, gate
operators and door operators. Kits include channel receiver
and transmitter.
• Transmitter can be mounted inside or outside. IP65
rated
• Rolling code encryption
• Field configurable latching/bi-stable mode keeps doors
unlocked until button is pressed again
• Receiver can be controlled by up to 30 transmitters
• Receiver relay mode is either momentary or bi-stable
for 2nd relay.
2. SPECIFICATIONS
Input Power
Standby Current
Operating Current
Working Humidity
Working Temperature
Lock Relay
Memory
Encryption
Number of Relays
Frequency
IP Rating
Dimensions
(2) Self Tapping Screws (used for mounting)
(1) Grommet
12V or 24V AC/DC
18mA (Input VDC12V)
3-1/4" (82mm)
80mA (Input VDC12V)
0-95%
-20°C to 85°C (-4°F to 185°F)
1A @ 30VDC
30 codes
Rolling code
7-3/8"
(187mm)
2 relays; 1
relay momentary, 2
ST
momentary or latching/bi-stable
868.35 MHz
65 with grommet
7-3/8" W x 3-1/4" H x 1-5/8" D
FCC ID: U5Z-CONNECT4CC
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
(187mm x 82mm x 42mm)
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference hat may cause undesired operation.
Front View
3. DIMENSIONS
7-3/8"
(187mm)
1-5/8"
(42mm)
5/8"
(15mm)
ND
5"
(127mm)
Side View
3-1/4" (82mm)
5"
(127mm)
FCC ID: U5Z-CONNECT4CC
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference hat may cause undesired operation.
Front View
1/8" (4mm)
Mounting Hole
( 2 Places )
1/16"
(2mm)
Back View
1-5/8"
(42mm)
5/8"
(15mm)
1/1
(2m
Side View
3-7/8"
(97mm)
1-5/8" (41mm)
Page 1 of 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CAMDEN CM-SRX2
Summary of Contents for CAMDEN CM-SRX2
- Page 1 (2) Wall Plugs (used for mounting) 1. DESCRIPTION 3. DIMENSIONS 1-5/8” The CM-SRX2 is a standalone receiver that allows access (42mm) control up to two doors from one device. Ideal for front desk/ 3-1/4” (82mm) reception applications or hard-to-wire locations. Designed to work with magnetic locks, electric strikes, keypads, gate 5/8”...
- Page 2 CM-SRX2 Wireless 2 Channel Receiver INSTAL L AT ION INS T RUCT IONS 4. INSTALLATION 1. Antenna Connection Microswitch Impulse/ Bi-Stable 2. Jumper 12/24V Power Supply 3. Channel 1 Operation LED Relay 1 Output 4. Channel 2 Operation LED 10. Relay 2 Output 5.
- Page 3 CM-SRX2 Wireless 2 Channel Receiver INSTAL L AT ION INS T RUCT IONS Total Reset In programming mode, press the programming button down and simultaneously short the “MR” jumper for 3 seconds. The receiver will issue 10 short acoustic warning signals followed by others at a faster pace to indicate that the operation has been successful.
Need help?
Do you have a question about the CM-SRX2 and is the answer not in the manual?
Questions and answers