CAMDEN CX-ED1959 Installation Instructions

Electrified Locks, Relays and Timers
CX-ED1959 Outdoor Gate
Electric Strike
INSTALLATION INSTRUCTIONS
THIS PACKAGE INCLUDES:
1- 4 PIN power connector (12V)
1- 4 PIN power connector (24V)
4- Wire nuts
2- Mounting brackets
1. GENERAL DESCRIPTION
Camden CX-ED1959-MB Grade 1 Outdoor Gate Strike for cylindrical and
mortise locksets (without dead bolts) offers best-in-class strike quality,
performance and durability. The universal design delivers unparalleled
application flexibility, with field selectable voltage and fail safe/fail secure
operation for use in wood or metal jambs.
2. SPECIFICATIONS
Voltage
Current Draw
Static Strength
Dynamic Strength
Endurance
Latch Open/Ins
Mode
Duty
Dimensions (Body)
UL294 PERFORMANCE LEVEL
Line Security
Attack Level
Endurance Level
Standby Power
1- Varistor
2- #10 - 1 x 1/4" self-tapping screws
4- #12 - 24 x 1/2" machine screws
1 - Mounting Box
12/24V DC
280mA / 140mA
1500 lbs
70 ft-lbs
1,000,000 Cycles (Factory Tested)
250,000 cycles (UL Verified)
1-9/16" x 7/8" (40mm x 22mm)
Field Selectable
Fail Safe/Secure
Continuous
4-13/16"H x 1-5/8"W x 1-11/16"D
(122 mm x 41mm x 43mm)
Level I
Level I
Level IV
Level I
3. DIMENSIONS
NOTE
• The products are intended to be installed in accordance with the
installation wiring diagram, mechanical assembly drawings provided
with each product, the local authority having jurisdiction (AHJ) and
the electric code, NFPA 70. When installed in fail secure mode, the
local authority shall be consulted with the regards to the use of
possible panic hardware to allow emergency exit from the secure
area.
• The electric door strike shall be installed in such a way and in such
a location so as to not impair the operation of an emergency exit
device or panic hardware mounted on the door.
Page 1 of 4