Information And General Instructions; Information About The Instruction Manual; Guarantee And Responsibility - Riello 1106 T81 Installation, Use And Maintenance Instructions

Information and general instructions

1
1.1

Information about the instruction manual

Introduction
The instruction manual supplied with the burner:
is an integral and essential part of the product and must not
be separated from it; it must therefore be kept carefully for any
necessary consultation and must accompany the burner even
if it is transferred to another owner or user, or to another sys-
tem. If the manual is lost or damaged, another copy must be
requested from the Technical Assistance Service
the area;
is designed for use by qualified personnel;
offers important indications and instructions relating to the in-
stallation safety, start-up, use and maintenance of the burner.
Symbols used in the manual
In some parts of the manual you will see triangular DANGER
signs. Pay great attention to these, as they indicate a situation of
potential danger.
GENERAL DANGERS
The dangers can be of 3 levels, as indicated below.
Maximum danger level!
This symbol indicates operations which, if not
carried out correctly, cause serious injury,
death or long-term health risks.
DANGER
This symbol indicates operations which, if not
carried out correctly, may cause serious
injury, death or long-term health risks.
WARNING
This symbol indicates operations which, if not
carried out correctly, may cause damage to
the machine and/or injury to people.
CAUTION
1.2

Guarantee and responsibility

guarantees its new products from the installation date, in
accordance with the regulations in force and/or the sales con-
tract. At the moment of the first start-up, check that the burner is
integral and complete.
Failure to observe the information given in this
manual, operating negligence, incorrect installation
and the carrying out of non authorised modifications
WARNING
will result in the annulment by
guarantee that it supplies with the burner.
In particular, the rights to the guarantee and the responsibility
will no longer be valid, in the event of damage to things or injury
to people, if such damage/injury was due to any of the following
causes:
incorrect installation, start-up, use and maintenance of the
burner;
improper, incorrect or unreasonable use of the burner;
intervention of unqualified personnel;
carrying out of non authorised modifications on the
equipment;
4
GB
DANGER
Other symbols
of
Abbreviations used
Ch.
Fig.
Page
Sec.
Tab.
Delivery of the system and the instruction manual
When the system is delivered, it is important that:
The instruction manual is consigned to the user by the system
manufacturer, with the recommendation to keep it in the room
where the heat generator is to be installed.
The instruction manual shows:
the serial number of the burner;
the address and telephone number of the nearest Assistance
Centre.
The system supplier must carefully inform the user about:
- the use of the system;
- any further tests that may be necessary before the system
is started up;
- maintenance and the need to have the system checked at
least once a year by the manufacturer or another specialised
technician.
To ensure a periodic check,
ing up of a Maintenance Contract.
use of the burner with safety devices that are faulty,
incorrectly applied and/or not working;
installation of untested supplementary components on the
burner;
powering of the burner with unsuitable fuels;
faults in the fuel power supply system;
use of the burner even following an error and/or an
irregularity;
repairs and/or overhauls incorrectly carried out;
of the
modification of the combustion chamber with inserts that
prevent the regular development of the structurally
established flame;
insufficient and inappropriate surveillance and care of those
burner components most subject to wear and tear;
use of non-original
parts, kits, accessories and optionals;
force majeure.
furthermore declines any and every responsibility
for the failure to observe the contents of this manual.
DANGER: LIVE COMPONENTS
This symbol indicates operations which, if not
carried out correctly, lead to electric shocks
with lethal consequences.
ENVIRONMENTAL PROTECTION
This symbol gives indications for the use of
the machine with respect for the environ-
ment.
This symbol indicates a list.
Chapter
Figure
Page
Section
Table
recommends the draw-
components, including spare