Dell OptiPlex GX745 User'smanual page 43

1 floppy-drive insert
3. If you are replacing an existing drive:
a. Remove the three shoulder screws from the existing drive.
b. Insert the three shoulder screws into the sides of the new drive and tighten them.
4. Connect the power and data cables to the drive.
5. Align the shoulder screws with the screw guides, and slide the drive into the bay until it clicks into place.
6. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.
7. Replace the computer cover (see
8. Update your configuration information by setting the appropriate Drive option (0 or 1) under Drives. See
9. Verify that your computer works correctly by running the Dell Diagnostics (see
Replacing the Computer Cover).
System Setup
Dell Diagnostics).
for more information.