Advertisement
5.3 USED AS STICK VACUUM CLEANER
Place your foot gently on the motorized brush and
tilt the product backward, switch on the product
and move it back and forward to start your
cleaning (You may use 1pc of tube only or 2pcs
tubes connected).
1. Step on the motorized brush and tilt the
appliance backward;
2. Press the power button to turn on the power
supply;
3. Press the adjustment button to adjust the flow;
4. Move back and forth and start cleaning.
ATTENTION:
By default, the vacuum cleaner is in normal mode when turned on. Switch to
high-performance mode by pressing the adjustment button one time. Switch
to economic mode by pressing the adjustment button two times. Press the
adjustment button again to switch back to normal mode. Turn off the product
by pressing the power button again.
When the battery is empty, the vacuum cleaner turns off itself and the three
power indicators on the battery pack flash at the same time.
The motorized roller rolls at very high speed. To avoid damage to cleaning
surface, do not stay cleaning in same spot too long. The motorized nozzle has
an overheating protection function which can cut off the power to nozzle when
blockage or like hair twirling occurs. Please turn off the product, unblock and
clean the nozzle. Do not use the product until it cools down.
5.4
USED AS HANDHELD VACUUM CLEANER
① Press the button on the connection tube；
② Separate the body and connection tubes (place the ground brush and
connection tube properly)；
③ Using a 2 in 1 nozzle：Insert the hand-held vacuum cleaner nozzle as
shown.
Or use the connection tube as shown before connecting the 2 in 1 nozzle
④ Press the power switch to start the machine。
Advertisement
