Advertisement
5. ASSEMBLY INSTRUCTION
Please carefully read "ATTENTION" before assembly：
This product can't stand by itself, please apply body part onto holder which is
on the connection tube.
5.1 PRODUCT ASSEMBLY
1. Connect the motorized brush and the connection tube until the button is
locked;
2. Insert the body into the connection tube until the button is locked；
3. Hang the assembled vacuum cleaner and a 2 in 1 nozzle on the holder.
5.2 Vacuum Cleaner
Charging
BATTERY ASSEMBLY:
Same as illustration: have battery
pack locked into cleaner body.
BATTERY CHARGING:
1. Make sure that the product is
powered off, plug the adapter
charging head into the charging port
behind the console (Battery pack can
be charged separately) and plug the
adapter into a 100-240V to 50/60Hz
power outlet.
2. When charging the battery, the 3
charging indicators will be lit up in
turn, and the indicator lights up to
show the current charge. When the
charge is complete, all 3 lights are
on for 3 minutes and then turn off.
WARNING: Do not turn on the product and do not try removing
battery during its charging!
ATTENTION
Only within 0
0
C-45
0
C can charging be allowed, over heating or overly cold
temperatures could prolong the charging time or even damage the battery.
Normal charging takes 4-5 hours, please charge fully and use the product until
the battery is fully discharged for 1-3 times when you initiate using it so that
the battery can be fully activated.
If this product will not be used for a long time, please charge and discharge
this product once every 3 months.
Advertisement
