PRODUCT NO.:360215 Please read all of the information provided in this owner’s manual before operating the Nero cyclonic hand held machine. Images in this manual are for illustrative purposes only. Due to constant improvements, we advise that changes to the design, material, specifications...
Page 2
DESCRIPTION A. On/Off Button D. Dust compartment B. Handle E. Floor brush C. Tube IMPORTANT...
Page 3
1.Read this instruction booklet carefully. 2.Before using the appliance, check that the mains power voltage corresponds to the voltage shown on the rating plate. 3.The appliance should be connected to a correctly-earthed 10 power socket. 4.Always remove the plug from the power socket when the appliance is not in use and before carrying out any cleaning or maintenance operations.
ASSEMBLING THE VACUUM CLEANER Assembly before operation 1、 itting the floor brush Insert the brush into the body. INSTRUCTION FOR USE 1, Unfold the electric cable, after rotating the cable winding holder 180 degree, the plug insert the electrical outlet which the same as the nameplate; press the switch button, the vacuum...
cleaner will now begin working. 2. Adjust the degree between brush and body by rotating the handle. 3. Stop the vacuum by pressing the switch button, disconnect the plug from outlet, rotate the cable on the winding holder 180 degree to fix the cable. Using the cleaning accessories Clean the dust 1,Lift the cover and take out the dust cup.
Waste electrical production should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Backed by the Nero 1 Year Warranty Imported By: R. Weatherdon & Co Pty Ltd www.weatherdon.com.au...