Transfer Audio Or Replacing With New Wireless Device; Wireless Link Lost - Motorola PMMN4097 User Manual

Figure 3.4: Pairing your Mobile Mic Gateway with a wireless PTT
NOTE:
When the Wireless PTT is low in power, your WRSM
indicates a low battery tone.
20
English
Align
Transfer Audio Or Replacing With New
Wireless Device
Procedure:
1
Press the PTT button on the Mobile Mic Gateway to unpair and
audio will route back to the Mobile Radio.
2
Alternatively, place the blue dot (secure pairing spot) on the WRSM
within one inch of the blue dot (secure pairing spot) on the Mobile
Mic Gateway. The audio will route back to the Mobile Radio/Mobile
Mic Gateway. Audio indication LED on the WRSM will not be lit.
To Pair With A New Wireless Device:
Follow the procedure from "Pairing Your Mobile Mic Gateway with
WRSM" on page 19 for new pairing.
NOTE:
If the Mobile Mic Gateway has been paired with a WRSM and
needs to now be paired with a different device, the Mobile Mic
Gateway does not have to clear its previous pairing. The
previous pairing will be cleared automatically when pair with a
new device.

Wireless Link Lost

In the event of interference, or if the Mobile Mic Gateway is prompted
with Poor Signal / Out Of Range indicator, the link between the WRSM
and Mobile Mic Gateway may be lost.
If the link between the WRSM and Mobile Mic Gateway is lost, the
received audio is automatically routed back to the radio's speaker.