Selecting System Operation Mode; Hvac System Mode - Bryant Housewise Preferred T6-WEM01-A Owner's Manual

Use the bottom Touch- N- Go button to select the length of time you wish to stay in that profile or resume your schedule.
NOTE: You adjust your default Touch- N- Go hold time in the Preference menu (Touch Menu > Settings > Preferences).

Selecting System Operation Mode

The Fan and Mode drop- down menus in the upper right and left corners of the Home Screen allow you to quickly change the operating mode
of your system. You can also use the System menu to control the basic operation of your HVAC system, including the operation of
accessories like humidifiers, dehumidifiers, and ventilators.

HVAC System Mode

The HVAC System settings displayed in the Mode drop- down on the Home Screen and System menu depend on the type of system you
have. Depending on your system, one or more the following options are shown:
S Cool: Turn on cooling when the current temperature rises above your setpoint temperature.
S Heat: Turn on heating when the current temperature drops below your setpoint temperature.
S Auto: Activate the heating or cooling system as required to keep your home within the configured range of setpoint temperatures.
S Aux: Only use the auxiliary or backup heat source to maintain the heat set point temperature. This option only appears if auxiliary heat was
configured during installation.
S Off: Turn the system off. When the system is off, only the current temperature and humidity will be displayed on the Home Screen.
On Thermostat and Smartphone App:
From the Home Screen, touch Mode in the upper right corner of the screen. OR: touch Menu > System > HVAC Operating Mode
On Web Portal:
Touch Mode in the upper right corner of the Home Screen tile. OR: touch the My System Tile.
7
A150008
A150009