Table of Contents
Advertisement
You can further customize the operation and display of your thermostat to suit your personal preferences.
NOTE: System settings are only configurable from the thermostat itself, not the Smartphone App. Some settings, where indicated, are also
configurable from your Web Portal.
Smart Setback
Smart Setback helps take the guesswork out of balancing your comfort and energy savings. This feature learns the characteristics of your
home – and the way you live in it – then uses the weather outside to intelligently adapt every day for greater efficiency while keeping you
comfortable. Over time, Smart Setback determines the optimal setback and ramp time between each change in your schedule so your home
reaches your desired comfort set point at the scheduled time through energy efficient operation.
On the Thermostat:
1. Touch Menu > Settings > Preferences
2. Touch Heating Smart Setback or Cooling Smart Setback.
3. Touch Enable or Disable. Touch Save.
On the Web Portal:
1. Select Settings tile.
2. Select Preferences.
3. Select Heating Smart Setback or Cooling Smart Setback.
4. Select Enable or Disable.
Cool to Dehumidify
This smart feature reduces "cold but clammy" home conditions by removing moisture from the air. Your cooling system will continue to cool
after your cooling set point is reached to remove additional humidity from the air.
On the Thermostat :
1. Touch Menu > Profiles > Humidify Profiles > Dehumidification Set point
2. Use up and down arrows to select how far you would like your system to cool past your set point to remove humidity from your
home.
Window Protect
When a humidifier is installed in your home, this smart feature creates comfortable humidity levels in the home while preventing
condensation from forming on windows.
On the Thermostat and Smartphone App:
1. Touch Menu > Profiles > Humidity Profiles > Humidification Setpoint
2. Touch Window Protect then use the up or down arrows to select the desired level between 1 - 7, with 7 being for the most efficient
windows.
3. Touch Save
On the Web Portal:
1. Select the My System tile
2. Select Humidifier
3. To use Window Protect, touch Window Protect then use the slider to select the desired level between 1 - 7, with 7 being for the most
efficient windows.
4. Touch the X in the upper right corner to close the window
Date and Time
You can configure the time to use a 12 or 24- hour format.
NOTE: The current date and time are programmed during initial setup and automatically from the Internet. If you need to adjust the date and
time, log in to your personalized web portal or manually adjust from the thermostat.
CUSTOMIZING YOUR SETTINGS
21
Advertisement
Table of Contents
