Programming; Remarks About Programming - Philips CDR770BK99 User Manual

PROGRAMMING

Remarks about programming

• You can program up to 99 tracks to play in any desired
sequence.
• Tracks can be programmed more than once, but each time
counts as a track ( ).
STEP
Programming
1 In Stop mode press PROGRAM to enter Program mode.
flashes and PROGRAM followed by track
PROG
information appears on the display.
REM REC TIME TRACK TOTAL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
SYNC MANUAL
RECORD
DIGITAL I CD
OPTICAL I
RW
ANALOG
REM REC TIME TRACK TOTAL
1
SYNC MANUAL
RECORD
DIGITAL I CD
OPTICAL I
RW
ANALOG
2 Select the desired track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
REM
TIME TRACK TOTAL
2 7 8 11
SYNC MANUAL
RECORD
DIGITAL I
CD
OPTICAL I
RW
ANALOG
or:
Key in a track number with the number keys and press
ENTER to confirm. For 2-digit numbers, press the keys in
rapid succession.
The track will be stored in the program.
The track number, total program time and the number of
programmed tracks (
STEPS
3 Repeat step 2 for all tracks to be programmed.
4 Press STOP or PROGRAM to end programming.
lights continuously.
PROG
5 Press PLAY/PAUSE 2 ; to start programmed play.
Note:
- To review the program, press PROGRAM, followed by 5 or
6 with the CD recorder in Stop mode.
- To add more tracks to the program, repeat steps 1 to 5.
- If you try to store more than 99 tracks, PROG FULL will
appear on the display.
24
REM TRACK TIME STEP
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
REM TRACK TIME STEP
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
TRACK TIME STEP
REM
PROG
SHUFFLE ALL
REPEAT
SCAN TRACK
) are displayed.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
will disappear from the display.
PROG
• The program is also cleared when you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROGRAM to enter Program mode.
2 Use 5 or 6 to select the track from to be deleted.
The track number and program step will be shown on
the display.
3 Press CANCEL/DELETE to erase the track from the program.
The remaining program steps and the remaining playing
time on the program will be displayed.