Table of Contents
Advertisement
Remarks about programming
• You can program up to 99 tracks to play in any desired
sequence.
• Tracks can be programmed more than once, but each time
counts as a track.(
)
STEP
• A program for playback can be made from both the disc in
the recorder and the disc in the player. A program for
recording can only be made from the disc in the player (CD
deck).
Programming for playback
1 Select Changer mode or DJ mode using the DJ MODE key.
CHANGER or DJ MODE appears on the display.
2 Press CDR or CD to select the required deck.
Selected key lights up.
3 Press PROG(ram) to enter Program mode.
flashes and PROGRAM appears on the display.
PROG
REM
REC
TIME
TRACK
TOTAL
1
2 3 4
5
6
7 8
9 10 11
SYNC MANUAL
RECORD
CHANGER
DIGITAL
I
CD
OPTICAL
I
RW
ANALOG
4 Select the required track numbers by turning the EASY
JOG/ENTER key left or right and store by pressing ENTER.
REM
REC
TIME
TRACK
TOTAL
2
7 8
11
SYNC MANUAL
RECORD
CHANGER
DIGITAL
I
CD
OPTICAL
I
RW
ANALOG
or:
Key in a track number with the number keys. For 2-digit
numbers, press the keys in rapid succession.
The track will be stored in the program.
The track number, total program time and the number of
programmed tracks (
STEPS
5 Repeat step 3 to 4 for all tracks to be programmed.
6 Press STOP or PROG(ram) to end programming.
lights continuously.
PROG
7 Press PLAY/PAUSE 2 ; to start programmed play.
REM
TRACK
TIME
STEP
PROG
SHUFFLE
ALL
CD
REPEAT
RW
SCAN
TRACK
REM
TRACK
TIME
STEP
PROG
SHUFFLE
ALL
CD
REPEAT
RW
SCAN
TRACK
) are displayed.
Programming for recording
1 Press RECORD TYPE to select the required recording mode
(see 'Recording').
2 Compile your programme as described in "programming for
playback".
• Only tracks from the disc in the CD player can be stored.
3 Press RECORD to start recording.
Note:
- To review the program, press PROG(ram), followed by
6 with the CD player or CD recorder in stop mode.
- To add more tracks to the program, repeat steps 1 to 7.
- If you try to store more than 99 tracks, PROG FULL
appears on the display.
Clearing a program
1 Press STOP 9 if necessary to stop programmed play.
2 Press STOP 9 again to clear the program.
disappears from the display.
PROG
• The program is also cleared if you open the disc tray.
Erasing a track from a program
1 In Stop mode press PROG(ram) to enter Program mode.
2 Use 5 or 6 to select the track from which to delete.
The track number and program step will be shown on
the display.
3 Press DELETE/CANCEL to erase the track from the program.
The remaining program steps and the remaining playing
time of the program will be displayed.
PROGRAMMING
5 or
25
Advertisement
Table of Contents
