Program; Programming Track Numbers; Erasing A Track From The Program; Clearing The Program The Program - Philips CDR 785 Manual

Programming track numbers

OPEN/ CLOSE
R
W
You can select tracks and store them either in the CD changer,
or CD recorder memory. If you use the program for playback
you can choose one of the two memories, else if you like to
specify tracks for recording, use the CD changer memory only!
You can store any track more than once.
1 Load the desired disc(s) in the disc tray(s).
2 Press either CD 1, CD 2, CD 3, or CDR to select the disc.
3 Press PROG(ram).
PROG
4 Rotate ¡ JOG CONTROL ™ (press the numerical keys on
the remote control; for 2-digit numbers, press the keys in
rapid succession) to select the required track numbers and
store each track by pressing YES.
The number of programmed tracks (
total program time are displayed.
CD changer only
• If you wish to program a complete CD from the CD Changer
rotate ¡ JOG CONTROL ™ to select CD1 (or 2, 3) ALL
and press YES.
All tracks of CD 1 (or 2, 3) will be programmed.
5 Press PROG(ram) to end programming.
PROG
Note: If the maximum number of programmable tracks is
reached, the display shows PROGRAM FULL.
Downloaded from www.Manualslib.com
ON/OF F
REPE AT
CD TEXT
SHUF FLE
DISPL AY
STOP
PLAY /PAUS E
CD-CH ANGE
CD TEXT EDIT ING
RECORD
REC LEVEL BALAN CE
CD CD
CDR
COMPI LE CD
REC TYPE NO
AUX
ERASE
FINALIZ E
starts blinking and PROGRAM is displayed.
STEP
TEXT TOTAL TRACK TIME TOTAL REM
STEP
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
CD RW CD RW
SHUFFLE REPEAT ALL EDIT
RECORD IN PROGRESS
STEP TEXT TOTAL TRACK TIME TOTAL REM
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 +
COMPILE CD TRACK PROG
CD RW CD RW
SHUFFLE REPEAT ALL EDIT
RECORD IN PROGRESS
stays shown and the program is currently available.
manuals search engine

Erasing a track from the program

1 If necessary press STOP 9.
CD 1
2 Press either CD 1, CD 2, CD 3, or CDR to select the desired
CD 2
memory.
R
CD 3
3 Press PROG(ram), followed by 5 or 6 to move through
the program steps.
The track number at the selected step and the total
TEXT
PROG
TRACK EDIT
program time are displayed.
JOG CONTR OL
4 Press NO to remove the track from the program.
YES
CLEARED is displayed briefly.
The next programmed track number will move up to this
position and is displayed together with the step number
and the remaining total program time.
Clearing the program
1 If necessary press STOP 9.
2 Press NO.
CLEAR PROG ? is displayed.
3 Press YES to clear the program.
PROG CLEARED will be displayed and
Note: If you open the CD recorder or the CD changer tray the
respective program will be cleared.
), PROG and the

Making a program for recording

REC TRACK TIME
See 'High speed recording and automatic finalizing (optional)
of the current program' under chapter 'Internal recording'.
DIGITAL
OPTICAL
ANALOG
FINALIZE ALC
REC TRACK TIME
DIGITAL
OPTICAL
ANALOG
FINALIZE ALC

PROGRAM

W
PROG
goes off.
21