To Disable Crown Button Mode Switching - Casio 5142 User Manual

Note
•
If you do not perform any operation for more than three minutes after pulling out the
crown, crown operations will become disabled automatically. If this happens, push
the crown back in and then pull it out again to re-enable crown operations.
Disabling Crown Button Mode Switching
You can use the following operation to disable crown button mode switching, so the
watch does not change modes when the crown button is pressed.

To disable crown button mode switching

While pressing and holding down the crown button for about two seconds, press A.
This will disable mode switching when the crown button is pressed.
• While crown button mode switching is disabled, pressing the crown button will
cause the x Second Hand to move to the 3 o'clock position. The watch will not
change modes. The x Second Hand will resume normal timekeeping when you
release the crown button.
E-8