Table of Contents
Advertisement
To toggle the Home City time between standard time and daylight saving time
1.
Perform steps 1 through 3 under "To configure Home
City settings" on page E-45.
•
Each time you select a city code, the
and c Minute Hand move to the current time for that
city code.
2.
Press
A to toggle the time for the currently selected
city code between standard time and daylight saving
time.
•
The mode pointer will point to either
time) or DST (daylight saving time) on the v Mode
Disk, which indicates the current daylight saving
time setting.
•
While auto setting (AT) is enabled, the
pointer will point to either STD-AT or DST-AT to
indicate the current STD/DST setting.
z Hour Hand
STD (standard
v Mode Disk
E-51
Advertisement
Table of Contents
