Table of Contents
Advertisement
■ ■ Hands suddenly stop moving. Button operation also is disabled.
The watch may be in the power recovery mode (page E-20). Do not perform any
operation until the hands return to their normal positions (in about 15 minutes). The
hands should return to their correct positions when normal operation returns. To help
power recover, leave the watch in a location where it is exposed to light.
■ ■ The current time setting is off by hours.
Your Home City setting may be wrong. Check your Home City setting and correct it, if
necessary (page E-45).
■ ■ The current time setting is off by one hour.
•
If you are using the watch in an area where time calibration signal reception is
possible, see "To configure Home City settings" (page E-45).
E-95
Advertisement
Table of Contents
