Mounting The Microinverter - EcoFlow PowerStream User Manual

Mounting the microinverter

If your balcony solar system does not include a power station, you can mount the microinverter.
DANGER
Mount on the wall
1. Use the installation board to locate the hole and drill two holes about 41 mm in depth in the
wall. Then, insert M5*40 into the holes.
Installation board
X1
2. Install M5*12 in the corresponding positions on back of the microinverter.
Installation board
X1
17
Wear protective goggles or gloves when drilling holes.
M5*40
X2
M5*12
X3
41mm
2×
×1
×3