Makita VC009G Instruction Manual page 12

The length of the wand can be adjusted.
Loosen the ring on the wand and adjust the wand
length. Tighten the ring at your desired length.
Fig.21
► 1 . Ring
Hose hook
When you suspend the operation, the hook on the bent
pipe assembly can be used for hanging the wand on the
lower belt.
2
1
Fig.22
► 1 . Hook 2. Lower belt
Installing filter bag / dust bag
Optional accessory
Do not use a damaged filter bag.
CAUTION:
Always use the vacuum cleaner with the filter bag
properly installed. Otherwise the vacuumed dust
or particles may be exhausted from the cleaner
and they may cause respiratory disease to the
operator.
NOTICE:
replace with new one. When the dust bag is
already full, empty it. Continuous use with the filter
bag/dust bag full results in reduced suction power.
NOTICE:
motor:
—
—
Otherwise the motor may be broken.
NOTICE:
1
ing when installing the filter bag/dust bag.
NOTICE:
is an important component for maintaining the
appliance performance. Using non-genuine filter
bag/dust bag may cause smoke or ignition.
NOTE: When the filter bag/dust bag is not installed in
the cleaner, the front cover does not close completely.
Fig.23
1.
1
Fig.24
► 1 . Lever 2. Dust box cover
12 ENGLISH
When the filter bag is already full,
To prevent dust from getting into the
Make sure that the filter bag/dust bag is
installed before use.
Do not use a broken or ripped bag.
Do not fold the cardboard at its open-
The filter bag/dust bag for the cleaner
Unlock the lever and open the dust box cover.
2