Adapter Cards - IBM Aptiva 2158 Hardware Maintenance Service

Adapter Cards

NOTE:
1. Before removing an adapter card, note the location of the adapter
card and any cables. When removing an adapter card, install the
replacement card in the same slot as the one you removed.
2. If necessary, remove cards from the adjacent slots of the failed card.
•
Position the system unit such that the card is accessible to you.
•
If the adapter card has cables, disconnect them. Be sure to take note where
those cables are connected and how they are oriented. You will need to
reconnect those cables when you reinstall the card.
•
Remove the adapter card screw.
•
Carefully pull the adapter card straight out of the slot so that the card does
not bend.
84