IBM Aptiva 2158 Hardware Maintenance Service page 87

3. Select Settings , then select Control Panel.
4. Select the Sound icon.
5. In the Sound window, select chimes from the Names field. (To test other
adapter card software, select an action from a menu in that software.)
005 - IS THE PREVIEW BUTTON, OR ACTION IN OTHER SOFTWARE,
SELECTABLE ON THE SCREEN (SHOWN IN BLACK AND NOT GRAY)?
(YES, GO TO STEP 006. NO, READ AHEAD.)
•
Ensure that Windows 98 is properly installed.
•
Go to step 001.
006 -
•
Select the Preview button from the Sound window.
007 - DO YOU HEAR ANY SOUND FROM THE SPEAKER? (YES, READ
AHEAD. NO, GO TO STEP 008.)
•
The audio feature is functioning normally. Click Cancel to close the dialog
box. Exit Microsoft Windows 98.
•
If the symptom remains or has changed, go to "Index of Symptoms,
Messages, Error Codes, or Beeps" on page 33.
•
End.
008 -
•
Make sure that the volume control is not turned low.
•
Make sure that the speaker and its adapter are not damaged.
•
Make sure that the speaker is plugged in speak-out jack. See "Machine
Type 2158 System Board Jumpers and Connectors" on page 131 and
"Machine Type 2163 and 2164 System Board Jumpers and Connectors" on
page 135
•
If the error cannot be resolved, replace the system board.
•
End.
Check Procedures 55