Table of Contents
Advertisement
en Microwave
a The microwave starts and the cooking time counts
down. The heating line does not appear.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
6.
To stop the signal early, press any touch field.
‒
If necessary, set a microwave power setting and
‒
a cooking time again.
When the food is ready, press
‒
appliance off.
If you have switched off the drying function for the
7.
microwave in the basic settings, dry the cooking
compartment.
→ "Drying", Page 27
Note: If you open the appliance door during operation,
the operation stops. When you close the appliance
door, you have to press to continue. If you have
changed the basic setting, make sure that the mi-
crowave does not resume operation without food in-
side.
→ "Basic settings", Page 21
Changing the microwave power setting
If you change the microwave power setting, the set
cooking time set is retained.
Press to pause operation.
1.
Press the button for the microwave power setting
2.
that you require.
Press to continue operation.
3.
Changing the cooking time
After the start of the microwave operation, you can
change the cooking time directly.
Use the control ring to change the cooking time.
▶
a The change is applied immediately.
11.3 MicroCombi
To reduce the cooking time, you can use some types
of heating in combination with microwave mode.
Possible types of heating are:
¡ 4D hot air
¡ Top/bottom heating
¡ Circulated air grilling
¡ Grill, large area
¡ Grill, small area
Possible microwave power settings are:
¡ 90 watts
¡ 180 watts
¡ 360 watts
18
to switch the
Setting MicroCombi
Note:
Note the correct way to handle the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 7
¡ → "Microwave power settings", Page 12
¡ → "Cookware and accessories with microwave",
Page 16
Press
.
1.
Press "MicroCombi".
2.
Press the type of heating that you want to use.
3.
Press the button for the microwave power setting
4.
that you require.
Use the control ring to set the temperature.
5.
Press the cooking time and use the control ring to
6.
set the cooking time.
Press to start.
7.
a The appliance starts to heat and the cooking time
counts down.
a When the time has elapsed, a signal sounds. The
time shown in the display is zero.
When the cooking time has elapsed:
8.
To stop the signal early, press any touch field.
‒
If necessary, set a combination again.
‒
When the food is ready, press
‒
appliance off.
Changing the temperature
Once the MicroCombi operation has started, you can
change the temperature directly.
Use the control ring to change the temperature.
▶
a The change is applied immediately.
Changing the cooking time
After the start of the MicroCombi operation, you can
change the cooking time at any time.
1.
Press "Cooking time".
Use the control ring to change the cooking time.
2.
a The change is applied immediately.
Changing the combination
If you change the combination of the type of heating
and the microwave power setting, all of the other set-
tings are reset.
Press to pause operation.
1.
Change the type of heating or microwave power set-
2.
ting.
To change the microwave power setting, press
‒
on the microwave and change the microwave
power setting.
To change the type of heating, press on the type
‒
of heating and change the type of heating. Then
set the microwave power setting.
Press to continue operation.
3.
to switch the
Advertisement
Table of Contents
