Controlling A Tv With The Supplied; Setting Up The Remote To Control Your Tv - LG TS913SS Owner's Manual

Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing You can
1 (POWER) Turn the TV on or off .
0-9 numerical Selects numbered options in
buttons: a menu or inputs letters in the
keypad menu.
TV INPUT Select the TV's source.
Turns off the sound temporarily.
MUTE ( )
Press the button again to
restore the sound.
PR/CH W/S Scan up or down through
memorized channels.
VOL +/– Adjust the volume of the TV.
,
Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
1. Turn the TV on.
2. Press TV on the remote control to enter the TV
mode.
3. Press and hold TV for about 3 seconds until the
TV button can be seen illuminated.
4. Press the manufacturer code for your TV with
the numerical buttons (three digit code).
See the manufacturer code list on the pages 38-
41.
5. Press the ENTER (b) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Operating 35
4