Introduction - Linde RYVAL 160 T PULSE HF Operating Manual

INTRODUCTION

Congratulations on your new Linde AG, Linde Gas Deutschland product. We are
proud to have you as our customer and will strive to provide you with the best
service and reliability in the industry.
This Operating Manual has been designed to instruct you on the correct use and
operation of your Linde AG, Linde Gas Deutschland product. Your satisfaction
with this product and its safe operation is our ultimate concern. Therefore please
take the time to read the entire manual, especially the Safety Precautions. They
will help you to avoid potential hazards that may exist when working with this
product.
Read and understand this entire Manual and your employer's safety practices
before installing, operating, or servicing the equipment. While the information
contained in this Manual represents the Manufacturer's best judgement, the
Manufacturer assumes no liability for its use.
Ryval 160-200 T PULSE HF weld by those methods
a) E – (MMA) coated electrodes up to 4,0 mm
b) TIG HF (High Frequency ignition)
c) TIG lift arc.
Welding machines Ryval 160-200 T PULSE HF have these function: pre-gas,
post-gas, up slope, down slope, final current, high frequency ignition, two stroke
and four stroke, pulsed mode, bilevel, UP-DOWN control from the torch.
In MMA method are machines equipped with functions HOT START, ARC
FORCE and ANTISTICK.
In TIG method are machines equipped with function „fan as required" (if it is not
necessary to cool the machine, it automatically shuts down the fan).
Linde AG, Linde Gas Deutschland ©
3/16