Download Print this page

Motorola APX 6000XE 1 Quick Reference Manual page 3

Hide thumbs Also See for APX 6000XE 1:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
QR-Card.book Page 3 Saturday, May 28, 2016 8:51 PM
m
®
ASTRO
APX™ 6000XE Series
Digital Portable Radios
Quick Reference Card
RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before using
the radio, read the RF Energy Exposure and Product Safety
Guide for Portable Two-Way Radios which contains important
operating instructions for safe usage and RF energy awareness
and control for Compliance with applicable standards and
Regulations.
Radio Controls
3-Position A/B/C Switch
Top (Orange)
__________________
Button
__________
Accessory
Connector
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license. All
other trademarks are the property of their respective owners. © 2011–2016 by Motorola Solutions, Inc. All Rights Reserved. 05/16.
1303 East Algonquin Road., Schaumburg, Illinois 60196, U.S.A.
16-Position
Select Knob
__________
On/Off/Volume
Control Knob
Top Side
(Select) Button
__________
PTT Button
Side Button 1
__________
Battery
Side Button 2
__________
Radio On/Off
• On – On/Off/Volume knob clockwise.
• Off – On/Off/Volume knob counterclockwise.
Zones and Channels
• Zone – Toggle the Zone switch or use the radio
menu to the desired zone.
• Channel – Turn the Channel knob or use the
radio menu to the desired channel.
Antenna
Receiving and Transmitting
1
Select zone/channel.
2-Position
2
Listen for a transmission.
Concentric
OR
Switch
__________
Press and hold Volume Set button.
OR
Press Monitor button and listen for activity.
Top
Display
3
Adjust volume, if necessary.
Microphone
4
Press the PTT button to transmit; release to
receive.
Main
Speaker
Sending an Emergency Alarm
Bluetooth
1
Press and hold the Emergency button*.
Pairing
Indicator
2
The display shows EMERGNCY and the
current zone/channel. A short, medium-
pitched tone sounds, and the LED blinks red
momentarily.
3
When acknowledgment is received, you hear
four beeps; alarm ends; and radio exits
emergency.
*Default timer of Emergency button press to
activate Emergency is 50 milliseconds. This
timer is programmable, see Emergency
Operation in the user guide for details.
To exit emergency at any time, press and hold
the Emergency button.
English

Advertisement

loading