Download Print this page

Sealey GENERATION Series Instructions page 3

Long reach air die grinder

Advertisement

4.2.
Connect the grinder
to the air hose as in
Section 3.
4.3.
Adjust the flow of
incoming air by
rotating the chrome
ring around the air
inlet port at the rear
of the tool. There are
four positions to select
from.
4.4.
Place thumb on throttle
safety pin and push
forwards and down to
start grinder.
DO NOT allow grinder
to free run for an extended period of time as this will cause accelerated wear.
5. MAINTENANCE
WARNING! Disconnect grinder from air supply before changing accessories, servicing
or performing maintenance. Replace or repair damaged parts. Use genuine parts
only. Unauthorised parts may be dangerous and will invalidate the warranty.
5.1.
If the air system does not include an oiler, lubricate the grinder daily with a few drops of
Sealey air tool oil dripped into the air inlet.
5.2.
Clean the grinder after use.
5.3.
Loss of power or erratic action may be due to the following:
a) Excessive drain on the air line. Moisture or restriction in the air pipe. Incorrect size or
type of hose connectors. To remedy, check the air supply and follow instructions in
Section 3.
b) Grit or gum deposits in the grinder. If your model has an air filter (located in the area of
the air inlet), remove and clean it. Flush the grinder out with gum solvent oil or an equal
mixture of SAE No.10 oil and paraffin. Allow to dry before use.
5.4.
For a full service contact your local Sealey service agent.
5.5.
When not in use, disconnect from air supply, clean and store in a safe, dry, childproof
location.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
Web
sales@sealey.co.uk
01284 703534
email
G SA672
Issue:3(SP)-18/06/13

Advertisement

loading

This manual is also suitable for:

Gsa672