Summary of Contents for 8x8 Inc Poly VVX D230 DECT
Page 1
Factory resetting a Poly VVX D230 Base station to clear all previous configuration and put the device back to default settings. Applies To • Poly VVX D230 DECT Procedure 1. Ensure the base unit is powered on. Under normal working conditions the FIND led on the base will be solid red.
Page 2
Additional Information NOTE: Contrary to some published Poly documentation this procedure DOES NOT clear handsets registered to the base station. Per Poly support the only way to remove a handset registered to the base is via the individual handset settings (Settings->Registration->Deregister) or via accessing the web interface of the base unit (Setup Wizard->DEST Wireless->Registration).