Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zanussi ZWD 81660 NW
Summary of Contents for Zanussi ZWD 81660 NW
- Page 1 User Manual GETTING STARTED? EASY. ZWD 81660 NW EN User Manual Washer Dryer...
-
Page 2: Safety Information
SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. - Page 3 Connect the mains plug to the mains socket only at the end of • the installation process. Make sure that the mains plug is accessible after installation. The ventilation opening in the base must not be covered by a • carpet, mat, or any floor covering.
-
Page 4: Safety Instructions
Items such as foam rubber (latex foam), shower caps, • waterproof textiles, and rubber backed articles and clothes, or pillows fitted with foam rubber pads should not be dried in the washer dryer. Fabric softeners, or similar products, should only be used as •... -
Page 5: Water Connection
• Always use a correctly installed shockproof • If laundry has been washed with a stain socket. remover, carry out an additional rinse cycle • Do not use multi-plug adapters and extension before starting a drying cycle. cables. • Make sure that all metal objects are removed •... -
Page 6: Product Description
PRODUCT DESCRIPTION APPLIANCE OVERVIEW Worktop Detergent dispenser Control panel Door handle Rating plate Drain pump filter Feet for levelling the appliance FIXING PLATE KIT (4055171146) Read carefully the instructions supplied with the accessory. Available from your authorised dealer. If you install the appliance on a plinth, secure the appliance in the fixing plates. - Page 7 Additional rinse (Extra Rinse) Delay start (Delay Start) Automatic drying level (Auto Dry) Time save (Time Save) Start/Pause (Start/Pause) DISPLAY Time area : Programme duration : Selected drying time : Delay start : Alarm codes : Message of error : The programme is completed. Time programme indicators : Normal duration indicator : Quick indicator...
-
Page 8: Programme Chart
Washing phase indicator PROGRAMMES PROGRAMME CHART Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed Washing programmes 8 kg White cotton and coloured cotton. Normal, 1600 rpm heavy and light soil. Cotton 90°C - (Cold) 8 kg White cotton and fast-coloured cotton. - Page 9 Maximum load Programme Programme description Maximum spin Temperature range (Type of load and soil level) speed To rinse and spin the laundry. All fabrics, ex- 8 kg cept woollens and very delicate fabrics. Reduce Rinse 1600 rpm the spin speed accordingly to the type of laun- dry.
-
Page 10: Programmes For Automatic Drying
Programme options compatibility Programme ■ ■ ■ ■ ■ ■ ■ Cotton ■ ■ ■ ■ ■ ■ ■ Economy ■ ■ ■ ■ ■ ■ ■ Synthetics ■ ■ ■ ■ Wool ■ ■ ■ ■ ■ ■ ■ Delicates ■... -
Page 11: Programmes For Timed Drying
Dryness Level Type of fabric Load Cottons and Linen up to 4 kg Cupboard Dry (bathrobes, bath towels, etc) For items to be stored Synthetics and mixed fab- up to 2 kg rics (jumpers, blouses, underwear, household and bed linen) Cottons and Linen up to 4 kg Iron Dry... - Page 12 • Set this option to deactivate all spin phases. • Iron dry level for cotton items Only the drain phase is available. • The related indicator comes on. PREWASH • Set this option for very delicate fabrics. • The rinses phase uses more water for some With this option you can add a prewash phase to a washing programmes.
-
Page 13: Before First Use
To deactivate/activate the acoustic signals, If you deactivate the acoustic signals, press at the same time for 6 seconds. they continue operate when the appliance has a malfunction. BEFORE FIRST USE 1. Connect the mains plug to the mains socket. 5. -
Page 14: Setting A Programme
LIQUID OR POWDER DETERGENT When you use the liquid deter- 1. Position A for powder gent: detergent (factory setting). • Do not use gelatinous or thick liq- uid detergents. • Do not put more liquid then the maximum level. • Do not set the prewash phase. -
Page 15: Interrupting A Programme And Changing The Options
• The door locks, the display shows the 1. Press to pause the appliance. indicator 2. Wait until the door lock indicator goes off. • When the countdown is completed, the 3. Open the door. programme starts automatically. 4. Close the door and press again You can cancel or change the set of The programme or delay start continues to operate. -
Page 16: Daily Use - Drying Only
• Press one of the options to deactivate the If you set a programme or an option energy saving status. that ends with water in the drum, the energy saving status function doesn't activate to remind you to drain the water. -
Page 17: Daily Use - Washing & Drying
2. Remove the laundry from the appliance. When the door locked goes off in the display, Make sure that the drum is empty. you can open the door. 3. Keep the door ajar, to prevent mildew and 1. Turn the programme knob to to deactivate odours. -
Page 18: Hints And Tips
For more information see "At the end of the drying • Line dry this type of fabrics at open air when programme " of the previous chapter. they are washed the first time. • Clean the drain filter. 1. Remove the laundry from the appliance. •... -
Page 19: Care And Cleaning
ECOLOGICAL HINTS • Fabrics with residue of hair sprays, nail solvents or similar. • Set a programme without the prewash phase to • Garments with foam-rubber or materials similar wash laundry with normal soil. to foam-rubber. • Always start a washing programme with the maximum load of laundry allowed. -
Page 20: Maintenance Wash
• Select the cotton programme with the highest Regularly examine the drum to prevent limescale temperature with a small quantity of detergent. and rust particles. To remove rust particles use only special products DOOR SEAL for washing machines. Do this separately from the laundry wash. -
Page 21: Emergency Drain
CLEANING THE INLET HOSE AND THE VALVE FILTER 45° 20° EMERGENCY DRAIN 1. Disconnect the mains plug from the mains socket. Because of a malfunction, the appliance cannot 2. Close the water tap. drain the water. 3. Put the two ends of the inlet hose in a If this occurs, do steps (1) through (8) of 'Cleaning container and let the water flow out of the the drain filter'. -
Page 22: Possible Failures
POSSIBLE FAILURES Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is not a damaged fuse in the fuse box. The programme does not •... -
Page 23: Emergency Door Opening
Problem Possible solution • Make sure that the washing programme is finished. • Set the drain or the spin option if there is water in the drum. • Do the emergency drain procedure. See "Frost precautions" (in You cannot open the appli- "Care and Cleaning"... -
Page 24: Technical Data
2. Disconnect the mains plug from the mains CAUTION! Make sure that the socket. water temperature and the 3. Open the filter flap. laundry are not hot. Wait till they 4. Keep the emergency unlock trigger pulled cool down, if necessary. downward and, at the same time, open the appliance door. - Page 28 WWW.ZANUSSI.COM/SHOP...