Subscribe to Our Youtube Channel
Related Manuals for Altrad BELLE MINIMIX 150E+
Summary of Contents for Altrad BELLE MINIMIX 150E+
- Page 1 BELLE 870/00021/0 04/23 MINIMIX 150E+ Operators Manual UKCA Declaration of Conformity EC/EU Declaration of Conformity UKCA Declaration of Incorporation 3 - 7 EC/EU Declaration of Incorporation...
-
Page 2: Ukca Declaration Of Conformity
- ISO 3744:2010 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure Technical Files are held by Ray Neilson at the Altrad Belle address stated above:- Place of Declaration:- Sheen, Nr. Buxton,... -
Page 3: Ec/Eu Declaration Of Conformity
EC Declaration Of Conformity (DOC) We, Altrad Belle, Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB declare that the DoC is issued under our sole responsibility and belongs to the followings product(s): PRODUCT TYPE ..... Signed by: MODEL........Ray Neilson SERIAL No....... -
Page 4: Ukca Declaration Of Incorporation
The name and address of the representative authorised to compile the relevant technical documentation is:- Ray Neilson Altrad Belle, Sheen, nr. Buxton, Derbyshire, SK17 0EU, UK. Signed by: Ray Neilson Managing Director... -
Page 5: Ec/Eu Declaration Of Incorporation
The name and address of the representative authorised to compile the relevant technical documentation is:- Hugues Menager Altrad (Group Holding), 125 Rue du Mas Carbonnier, 34000, Montpellier, France. Signed by: Ray Neilson Managing Director... -
Page 6: Table Of Contents
Contents CONTENTS PAGE NUMBER UKCA DECLARATION OF CONFORMITY .............................. 2 EC/EU DECLARATION OF CONFORMITY ............................. 3 UKCA DECLARATION OF INCORPORATION ............................4 EC/EU DECLARATION OF INCORPORATION ............................5 INTRODUCTION ....................................... 7 WARNING ...................................... 7 Serial Numbers....................................8 MACHINE DESCRIPTION General......................................8 Standard Operation .................................. -
Page 7: Introduction
When replacements are required, insist on genuine Altrad Belle parts, as extensive damage is liable to result from the use of inferior quality parts. -
Page 8: Serial Numbers
The machine is intended to be used for the following, in safe environmental conditions as described in this manual. Any other use is not deemed suitable for this machine. Altrad Belle will not be liable for any damage or injury resulting from any use other than outlined above. -
Page 9: Main Components Locations
Fax: +44 (0)1298 84722 G. Stand Assembly Clip. H. Pivot Stand Top (with 360° rotation). J. Stand Base. MADE IN THE UNITED KINGDOM BY: K. Wheels. Altrad Belle Ltd. L. Belt Guard Sheen, Nr. Buxton, SK17 0EU M. Gearbox N. Serial Label SERIAL No.: MODEL CODE:... -
Page 10: Power Unit Components
Machine Description POWER UNIT COMPONENTS A. Battery Pack Compartment. B. Battery Pack Compartment Lid. C. Isolator Key. D. Battery Retaining Latch. E. Serial Label F. Air Vent Intake BATTERY PACK COMPONENTS A. Battery Charge Level Button. B. Battery Charge Level Display. C. -
Page 11: Battery Charger
Machine Description BATTERY CHARGER A. Battery Pack Charging Dock B. AC Power Cable Socket C. Dock Indicator 1 D. Dock Indicator 2 Model: 82C2 E. Battery is Charging (Blinking Green) ERP: 2901786 OUTPUT: 82V F. Battery is Fully Charged (Solid Green) INPUT: 230V ~ 50Hz/60Hz, 8A Before charging, read the instructions. G. Battery Over Temperature (Blinking Red) For indoor use. -
Page 12: Static Dimensions
Technical Data STATIC DIMENSIONS 597mm 1211mm 1057mm 1227mm... -
Page 13: General Data
Technical Data GENERAL DATA Model MINIMIX 150E+ Motor Power (Hp / kW) 2.0 / 1.5 Max. Drum Capacity (Ltr) Max. Mixing Capacity (Ltr) Mixing Output per Charge (m *Weight (Kg) Stand Weight (Kg) Noise Level (dB(A)) BATTERY Model Battery Model Code OPM/14/FIO Battery Type Li-Ion... -
Page 14: Safety Instructions
It is the responsibility of the operator to ensure that he/she fully understands how to operate this equipment safely. If you are unsure about the safe and correct use of the machine, consult your supervisor or Altrad Belle. -
Page 15: Operating The Machine
ENSURE extra care is taken when working near to banks or trenches where there is a danger of the material collapsing. • If you have to turn off the mixer in a emergency you must TURN OFF at switch. • If your mixer catches fire, use a dry powder or C02 fire extinguisher to put out the fire. If the fire can not be put out, keep away and call the fire brigade. If you are in any doubt about the safety condition of your machine, please contact Altrad Belle or your local authorised dealer. Young Children and the Infirm • This mixer is not intended for use by young children or infirm persons without supervision. • This mixer is not intended for use by persons (including children) suffering from diminished physical, sensory or mental abilities;... -
Page 16: Battery Charger
Safety Instructions BATTERY CHARGER • To reduce the risk of injury, ONLY charge Cramer 82v BAB733, BAB735 & BAB737 type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. • This Battery Charger is not intended for use by children or persons with physical, sensory or mental limitations or a lack of experience or knowledge. -
Page 17: Battery Pack
ENSURE that all consumables and replaced parts are disposed of safely and with minimum environmental impact. • MODIFICATIONS & REPLACEMENT PARTS • NEVER make any modifications or additions to the machine without the prior approval of Altrad Belle. Any unapproved modifications may affect the performance and safety of the machine. This may also void the Warranty. • ALWAYS use genuine Altrad Belle replacement parts. Use of non-genuine replacement parts may affect the performance and safety of the machine. This may also void the Warranty. Genuine Altrad Belle replacement parts can be purchased online at www.Altrad-Belle247.com... -
Page 18: Safety Decals
Safety Instructions SAFETY DECALS... - Page 19 Safety Instructions SAFETY DECALS A. Branding Decals B. General Safety / Info Decal. Read the Wear Ear Wear Eye Wear Protective Remove Battery *Indicates the Operators Protection Protection Footwear Before Noise Level Manual Transporting of the Machine * Also see Technical Data section for Noise Level for this machine. C.
- Page 20 Safety Instructions SAFETY DECALS E. Battery Removal Decal. Shows the correct procedure for removing the battery from the power unit. Push down lightly onto the top of the battery with the palm of your hand. 2. Whilst still pushing down, press and release the battery retaining latch with the fingers of the same hand. Remove your hand from the top of the battery and it should rise slightly. 3.
-
Page 21: Operating Instructions
Operating Instructions MIXER ASSEMBLY INSTRUCTIONS ENSURE the drum fits right up to the shoulder on the shaft. DO NOT spin on fast as this may damage CAUTION the gearbox. Tools Required 13mm Discard This Item CAUTION ENSURE all nuts and bolts are securely tight. -
Page 22: Stand Assembly Instructions
Operating Instructions STAND ASSEMBLY INSTRUCTIONS CAUTION DO NOT tip the mixer onto drum mouth when the the motor is running. CAUTION When rotating the mixer up into the stand position, always lift from the front of the mixer. NOTE: When ready for dismantling the mixer after use, follow all the previous procedures but in reverse order. Ensure Stand Clip is located correctly onto frame. -
Page 23: Charging The Battery Pack
Operating Instructions Refer to the Machine Description section to identify all components mentioned in this section. CHARGING THE BATTERY PACK The battery pack is not shipped fully charged. It is recommended to fully charge before use to ensure that CAUTION maximum run time can be achieved. -
Page 24: Removing The Battery Pack
Operating Instructions REMOVING THE BATTERY PACK CAUTION ENSURE the machine is switched OFF before removing the battery. 1. Stop the mixer using the stop button. 2. Open the protective cover on the mixer handles and then open the battery cover. 3. -
Page 25: Loading & Unloading
Operating Instructions LOADING AND UNLOADING Never remain under or in the immediate vicinity of the machine when it is lifted by a crane. Only use CAUTION marked lifting points. Always make sure that all lifting devices are dimensioned for the weight of the products. -
Page 26: Storage
Storage If the machine is not to be used for an long period of time it must be stored correctly to prevent deterioration or damage occuring during this period. Store the machine in a clean dry building with plenty of ventilation if possible. If you can only store outdoors, cover with a waterproof sheet / tarpaulin. -
Page 27: Service And Maintenance
A poorly maintained machine could be a danger to the operator and the other personnel on the worksite. ENSURE that the regular maintenance procedures listed in this manual are performed correctly and on time to keep the machine safe and efficient. ALWAYS use genuine Altrad Belle replacement parts, the use of spurious parts may void your warranty. Before any maintenance is carried out on the machine, switch off the machine and ALWAYS set the machine on stable, level ground. -
Page 28: Troubleshooting Guide
The motor has been overloaded. and an alarm can restart the mixer by pressing the Start button. be heard. Items marked with * should only be carried out by a competent electrician or Altrad-Belle dealer. BATTERY PACK & CHARGER Problem Cause... -
Page 29: Wiring Diagram
Wiring Diagram BK 2... -
Page 30: Environment
The user will lose any possible claims if replacement parts used are other than the makers original replacement parts. Replacement parts for this product can be ordered online 24 hours a day, 7 days a week at www.Altrad-Belle247.com For more information regarding the availability of replacement parts for this product, please contact Altrad Belle... -
Page 31: Warranty
2. Alterations, additions or repairs carried out by persons other than Altrad Belle or their recognised agents. 3. Transportation or shipment costs to and from Altrad Belle or their recognised agents, for repair or assessment against a warranty claim, on any machine. - Page 32 ALTRAD BELLE Sheen, Nr. Buxton, Derbyshire, SK17 0EU, GB Tel. +44 (0)1298 84606 - Fax +44 (0)1298 84722 - Email: sales@altrad-belle.com www.Altrad-Belle.com BELLE EU IMPORTER ADDRESS LIGHT ADRESSE DE L'IMPORTATEUR - DIRECCIÓN DEL IMPORTADOR - ENDEREÇO DO IMPORTADOR - ADRES IMPORTEUR CONSTRUCTION IMPORTØRENS ADRESSE - IMPORTEUR ADRESSE - INDIRIZZO DELL'IMPORTATORE - IMPORTÖRENS ADRESS - IMPORTØRADRESSE...
Need help?
Do you have a question about the BELLE MINIMIX 150E+ and is the answer not in the manual?
Questions and answers