Power Adapter Tester (Pat) - Infineon EZ-PD PAG1S-1P User Manual

EZ-PD™ PAG1S-1P based 65 W ATQ GAN USB PD dual-C charger
and adapter solution user guide
Test setup
5.2

Power adapter tester (PAT)

Connect the DUT to a USB-C power adapter tester
established, the PAT UI does a PDO discovery and displays the results.
The EZ-PD™ EZ-PD™ PAG1S-1P based 65 W USB PD dual-C charger and adapter solution is pre-configured with
seven PDOs:
Single output: Port1 or Port2:
Fixed PDOs: 5.0 V / 3.0 A; 9.0 V / 3.0 A; 15.0 V / 3.0 A; 20.0 V / 3.25 A

PPS: 3.3 V to 21.0 V, 3.25 A (PPS power limited)

Dual output: Port1 and Port2:
20 W: 5 V/3 A, 9 V/2.22 A, 3.3 V to 5.9 V/3 A, 3.3 V-11 V/2.2 A

32.5 W: 5 V/3 A, 9 V/3 A, 12 V/2.7 A, 3.3 V to 11 V/3 A, 3.3 V to 16 V/2.15 A

45 W: 5 V/3 A, 9 V/3 A, 12 V/3 A, 15 V/3 A, 20 V/2.25 A, 3.3 V to 16 V/3 A

Choose a suitable pre-configured PDO or configure a new one using the
the following sections use pre-configured PDOs.
To know more about the PAT tester, see USBCEE.
Figure 7 PAT tester and user interface
User guide
(PAT) using a USB Type-C cable. After the connection is
EZ-PD™ Configuration
9
Utility. Tests in
002-37406 Rev. *A
2023-04-21