Specification - Infineon EZ-PD PAG1S-1P User Manual

EZ-PD™ PAG1S-1P based 65 W ATQ GAN USB PD dual-C charger
and adapter solution user guide

Specification

2 Specification
Table 2 Test specifications
Parameter
Input voltage and frequency
Max output power
Output voltage
Peak efficiency
Protections
Charging standards
supported
EMI/EMC
User guide
Value
90 to 264 V AC, 47 to 63 Hz
65 W system power with dual-C and a max load current of 3.25 A
65 W on each port with a max load current of 3.25 A
Single port:
Fixed PDOs: 5.0 V / 3.0 A, 9.0 V / 3.0 A, 15.0 V / 3.0 A, 20.0 V / 3.25 A
PPS: 3.3 V to 21.0 V, 3.25 A with PPS power limit
Dual port:
20W: 5V/3A, 9V/2.22A, 3.3V-5.9V/3A, 3.3V-11V/2.2A
32.5W: 5V/3A, 9V/3A, 12V/2.7A, 3.3V-11V/3A, 3.3V-16V/2.15A
45W: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A, 3.3V-16V/3A
> 93%
Input overvoltage protection
1.
Input undervoltage protection
2.
V overvoltage protection (OVP)
3.
BUS_C
V undervoltage protection (UVP)
4.
BUS_C
Overcurrent protection (OCP)
5.
Short-circuit protection (SCP)
6.
Over-temperature protection (OTP)
7.
V to CC short protection
8.
BUS_C
USB-C PD v3.1 including programmable power supply (PPS) mode
1.
Apple Charging 2.4 A
2.
Qualcomm QC 2.0, 3.0, 4.0, 5.0
3.
Samsung AFC
4.
USB BC 1.2
5.
CE, CISPR32 CLASS B
1.
ESD, IEC61000-4-2
2.
Surge, IEC61000-4-5
3.
Harmonics, IEC61000-3-2
4.
5 002-37406 Rev. *A
2023-04-21