Test Setup; Test Equipment - Infineon EZ-PD PAG1S-1P User Manual

EZ-PD™ PAG1S-1P based 65 W ATQ GAN USB PD dual-C charger
and adapter solution user guide

Test setup

5 Test setup
Figure 6 shows the test setup to capture the electrical data of the DUT. The following setup is the optimal one
to capture efficiency by capturing:
Input power using a power meter

Output power using high-resolution output multimeters

Figure 6 Test equipment connected to the standalone REF_65W_2C_GAN_PAG1 + CCG7DC 65W_2C
with ATQ) board
5.1

Test equipment

Table 3 shows the test equipment to measure performance parameters such as efficiency, ripple, regulation,
and transient response.
Table 3 Test equipment details
Test setup
Programmable AC source
AC power meter
PAT tester
Electronic load
Multimeters
User guide
Description
Chroma 61501
Yokogawa WT310E
USBCEE PAT
Chroma 63102A
Keysight 34465A
8 002-37406 Rev. *A
2023-04-21