Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
4. Adhere the tape to secure the battery cable to the battery.
Next steps
1. Install the battery.
2. Install the
base
cover.
3. Follow the procedure in
WWAN card
Removing the WWAN card
Prerequisites
1. Follow the procedure in
2. Remove the
microSD
3. Remove the
base
cover.
4. Remove the battery.
Steps
1. Remove the single (M2x3) screw that secures the WWAN card bracket to the system board [1].
2. Remove the WWAN card bracket that secures the WWAN antenna cables [2].
3. Disconnect the WWAN antenna cables from the connectors on the WWAN card [3].
4. Slide and lift the WWAN card away from the connector on the system board [4].
After working on your computer
before working inside your
card.
.
computer.
Disassembly and reassembly
35