Dell Latitude 5400 Service Manual page 80

Hide thumbs Also See for Latitude 5400:
Table of Contents

Advertisement

5. Peel the adhesive tape on the eDP cable that is connected to the system board [1].
6. Remove the two (M2x3) screws that secure the eDP bracket to the system board [2].
7. Remove the eDP bracket away from the computer [3].
8. Lift the eDP cable from the connector on the system board [4].
9. Disconnect the cable from the connector on the system board [5].
80
Disassembly and reassembly

Advertisement

Table of Contents
loading

Table of Contents